255/80R17 in inches

33.1″ overall diameter, 10.0″ section width, 8.0″ sidewall.

Current size

A full stamp like 275/65R20 or 33x12.50R15, or the three numbers below.

255/80R17
Diameter 33.1″
Width 10.0″
Sidewall 8.0″
Circumference 103.9″
Revs / mile 610

255/80R17 measures 33.1″ overall diameter and 10.0″ section width. Sidewall height is 8.0″, circumference is 103.9″, and the tire turns 610 times per mile. Those figures are geometry off the stamped size, not a brand or load range.

255/80R17 dimensions

Calculated from 255/80R17. Diameter and width are what the "in inches" search is asking for.
MeasurementInchesMetric
Overall diameter33.1″840 mm
Section width10.0″255 mm
Sidewall height8.0″204 mm
Circumference103.9″2638 mm
Revolutions per mile610379 / km

The stamped width is 255 mm (10.0″). The aspect ratio is 80, so the sidewall is 80% of that width, which is 8.0″. The rim is 17 inches. Overall diameter is the rim plus two sidewalls: 17 + 2 × 8.0″ = 33.1″.

Sizes near 255/80R17

A swap that stays inside about 3% diameter usually keeps the speedometer honest and clears the same well. 33x12.50R17 is a close neighbour at -0.2% diameter. The percent column opens both stamps in the comparison calculator.

Catalog sizes closest to 255/80R17 by overall diameter.
SizeDiameterWidthvs 255/80R17
33x12.50R1733.0″12.5″-0.2%
275/75R1733.2″10.8″+0.5%
295/70R1733.3″11.6″+0.6%
285/70R1732.7″11.2″-1.1%
265/75R1732.6″10.4″-1.3%
255/85R1633.1″10.0″+0.0%

How to read the stamped size

255/80R17 is a metric size: width in millimetres, aspect ratio as a percent of that width, then the rim diameter in inches after the R. The how to read tire size page walks the whole sidewall, including load index and speed rating, which this page does not use.

These numbers are geometry, not a fitment guarantee

Diameter and width tell you whether a size is in the same family as what you have. They do not tell you whether 255/80R17 clears your fenders, matches your wheel width, or is load-rated for the vehicle. Check the door-jamb sticker and the wheel well before you buy.

Speedometer and revs

At 610 revolutions per mile, a trip computer calibrated for 255/80R17 is reading true only while this diameter is on the truck. A taller replacement under-reads speed and distance by the same percent the diameter grew. A shorter one over-reads. The comparison calculator puts a second size next to 255/80R17 and shows the error at 60 mph.

Frequently asked questions

What is 255/80R17 in inches?

255/80R17 is 33.1″ overall diameter and 10.0″ section width. The sidewall is 8.0″. Those convert the stamped size; they are not a brand measurement.

How tall is a 255/80R17 tire?

Overall diameter is 33.1″. That is the height of the tire standing on the ground, rim plus both sidewalls.

How wide is 255/80R17?

Section width is 10.0″ (255 mm). The tread is usually a bit narrower than the section width.