275/55R20 in inches

31.9″ overall diameter, 10.8″ section width, 6.0″ sidewall.

Current size

A full stamp like 275/65R20 or 33x12.50R15, or the three numbers below.

275/55R20
Diameter 31.9″
Width 10.8″
Sidewall 6.0″
Circumference 100.2″
Revs / mile 632

275/55R20 measures 31.9″ overall diameter and 10.8″ section width. Sidewall height is 6.0″, circumference is 100.2″, and the tire turns 632 times per mile. Those figures are geometry off the stamped size, not a brand or load range.

275/55R20 dimensions

Calculated from 275/55R20. Diameter and width are what the "in inches" search is asking for.
MeasurementInchesMetric
Overall diameter31.9″810 mm
Section width10.8″275 mm
Sidewall height6.0″151 mm
Circumference100.2″2546 mm
Revolutions per mile632393 / km

The stamped width is 275 mm (10.8″). The aspect ratio is 55, so the sidewall is 55% of that width, which is 6.0″. The rim is 20 inches. Overall diameter is the rim plus two sidewalls: 20 + 2 × 6.0″ = 31.9″.

Sizes near 275/55R20

A swap that stays inside about 3% diameter usually keeps the speedometer honest and clears the same well. 285/55R20 is a close neighbour at +1.4% diameter. The percent column opens both stamps in the comparison calculator.

Catalog sizes closest to 275/55R20 by overall diameter.
SizeDiameterWidthvs 275/55R20
285/55R2032.3″11.2″+1.4%
265/60R2032.5″10.4″+1.9%
255/70R1832.1″10.0″+0.5%
255/75R1732.1″10.0″+0.5%
275/65R1832.1″10.8″+0.5%
285/70R1631.7″11.2″-0.6%

How to read the stamped size

275/55R20 is a metric size: width in millimetres, aspect ratio as a percent of that width, then the rim diameter in inches after the R. The how to read tire size page walks the whole sidewall, including load index and speed rating, which this page does not use.

These numbers are geometry, not a fitment guarantee

Diameter and width tell you whether a size is in the same family as what you have. They do not tell you whether 275/55R20 clears your fenders, matches your wheel width, or is load-rated for the vehicle. Check the door-jamb sticker and the wheel well before you buy.

Speedometer and revs

At 632 revolutions per mile, a trip computer calibrated for 275/55R20 is reading true only while this diameter is on the truck. A taller replacement under-reads speed and distance by the same percent the diameter grew. A shorter one over-reads. The comparison calculator puts a second size next to 275/55R20 and shows the error at 60 mph.

Frequently asked questions

What is 275/55R20 in inches?

275/55R20 is 31.9″ overall diameter and 10.8″ section width. The sidewall is 6.0″. Those convert the stamped size; they are not a brand measurement.

How tall is a 275/55R20 tire?

Overall diameter is 31.9″. That is the height of the tire standing on the ground, rim plus both sidewalls.

How wide is 275/55R20?

Section width is 10.8″ (275 mm). The tread is usually a bit narrower than the section width.