315/75R16 in inches

34.6″ overall diameter, 12.4″ section width, 9.3″ sidewall.

Current size

A full stamp like 275/65R20 or 33x12.50R15, or the three numbers below.

315/75R16
Diameter 34.6″
Width 12.4″
Sidewall 9.3″
Circumference 108.7″
Revs / mile 583

315/75R16 measures 34.6″ overall diameter and 12.4″ section width. Sidewall height is 9.3″, circumference is 108.7″, and the tire turns 583 times per mile. Those figures are geometry off the stamped size, not a brand or load range.

315/75R16 dimensions

Calculated from 315/75R16. Diameter and width are what the "in inches" search is asking for.
MeasurementInchesMetric
Overall diameter34.6″879 mm
Section width12.4″315 mm
Sidewall height9.3″236 mm
Circumference108.7″2761 mm
Revolutions per mile583362 / km

The stamped width is 315 mm (12.4″). The aspect ratio is 75, so the sidewall is 75% of that width, which is 9.3″. The rim is 16 inches. Overall diameter is the rim plus two sidewalls: 16 + 2 × 9.3″ = 34.6″.

Sizes near 315/75R16

A swap that stays inside about 3% diameter usually keeps the speedometer honest and clears the same well. 285/65R20 is a close neighbour at -0.0% diameter. The percent column opens both stamps in the comparison calculator.

Catalog sizes closest to 315/75R16 by overall diameter.
SizeDiameterWidthvs 315/75R16
285/65R2034.6″11.2″-0.0%
325/75R1635.2″12.8″+1.7%
305/75R1634.0″12.0″-1.7%
295/75R1734.4″11.6″-0.5%
285/75R1834.8″11.2″+0.7%
315/70R1734.4″12.4″-0.7%

How to read the stamped size

315/75R16 is a metric size: width in millimetres, aspect ratio as a percent of that width, then the rim diameter in inches after the R. The how to read tire size page walks the whole sidewall, including load index and speed rating, which this page does not use.

These numbers are geometry, not a fitment guarantee

Diameter and width tell you whether a size is in the same family as what you have. They do not tell you whether 315/75R16 clears your fenders, matches your wheel width, or is load-rated for the vehicle. Check the door-jamb sticker and the wheel well before you buy.

Speedometer and revs

At 583 revolutions per mile, a trip computer calibrated for 315/75R16 is reading true only while this diameter is on the truck. A taller replacement under-reads speed and distance by the same percent the diameter grew. A shorter one over-reads. The comparison calculator puts a second size next to 315/75R16 and shows the error at 60 mph.

Frequently asked questions

What is 315/75R16 in inches?

315/75R16 is 34.6″ overall diameter and 12.4″ section width. The sidewall is 9.3″. Those convert the stamped size; they are not a brand measurement.

How tall is a 315/75R16 tire?

Overall diameter is 34.6″. That is the height of the tire standing on the ground, rim plus both sidewalls.

How wide is 315/75R16?

Section width is 12.4″ (315 mm). The tread is usually a bit narrower than the section width.