31x10.50R15 in inches

31.0″ overall diameter, 10.5″ section width, 8.0″ sidewall.

Current size

A full stamp like 275/65R20 or 33x12.50R15, or the three numbers below.

31x10.50R15
Diameter 31.0″
Width 10.5″
Sidewall 8.0″
Circumference 97.4″
Revs / mile 651

31x10.50R15 measures 31.0″ overall diameter and 10.5″ section width. Sidewall height is 8.0″, circumference is 97.4″, and the tire turns 651 times per mile. Those figures are geometry off the stamped size, not a brand or load range.

31x10.50R15 dimensions

Calculated from 31x10.50R15. Diameter and width are what the "in inches" search is asking for.
MeasurementInchesMetric
Overall diameter31.0″787 mm
Section width10.5″267 mm
Sidewall height8.0″203 mm
Circumference97.4″2474 mm
Revolutions per mile651404 / km

This is a flotation size. The first number is the overall diameter (31.0″), the second is the section width (10.5″), and the last is the rim (15 inches). Sidewall height is half of (diameter minus rim): 8.0″.

Sizes near 31x10.50R15

A swap that stays inside about 3% diameter usually keeps the speedometer honest and clears the same well. 255/70R17 is a close neighbour at +0.2% diameter. The percent column opens both stamps in the comparison calculator.

Catalog sizes closest to 31x10.50R15 by overall diameter.
SizeDiameterWidthvs 31x10.50R15
255/70R1731.1″10.0″+0.2%
255/75R1631.1″10.0″+0.2%
275/65R1731.1″10.8″+0.2%
275/50R2030.8″10.8″-0.6%
265/65R1730.6″10.4″-1.4%
245/70R1730.5″9.6″-1.6%

How to read the stamped size

31x10.50R15 is a flotation size, common on trucks and off-road tires. The first number is already the overall diameter in inches, so there is no aspect-ratio step. See how to read tire size for the metric form and 33 vs 35 tires for the usual flotation pair.

These numbers are geometry, not a fitment guarantee

Diameter and width tell you whether a size is in the same family as what you have. They do not tell you whether 31x10.50R15 clears your fenders, matches your wheel width, or is load-rated for the vehicle. Check the door-jamb sticker and the wheel well before you buy.

Speedometer and revs

At 651 revolutions per mile, a trip computer calibrated for 31x10.50R15 is reading true only while this diameter is on the truck. A taller replacement under-reads speed and distance by the same percent the diameter grew. A shorter one over-reads. The comparison calculator puts a second size next to 31x10.50R15 and shows the error at 60 mph.

Frequently asked questions

What is 31x10.50R15 in inches?

31x10.50R15 is 31.0″ overall diameter and 10.5″ section width. The sidewall is 8.0″. Those convert the stamped size; they are not a brand measurement.

How tall is a 31x10.50R15 tire?

Overall diameter is 31.0″. That is the height of the tire standing on the ground, rim plus both sidewalls.

How wide is 31x10.50R15?

Section width is 10.5″ (267 mm). The tread is usually a bit narrower than the section width.