265/50R20 in inches

30.4″ overall diameter, 10.4″ section width, 5.2″ sidewall.

Current size

A full stamp like 275/65R20 or 33x12.50R15, or the three numbers below.

265/50R20
Diameter 30.4″
Width 10.4″
Sidewall 5.2″
Circumference 95.6″
Revs / mile 663

265/50R20 measures 30.4″ overall diameter and 10.4″ section width. Sidewall height is 5.2″, circumference is 95.6″, and the tire turns 663 times per mile. Those figures are geometry off the stamped size, not a brand or load range.

265/50R20 dimensions

Calculated from 265/50R20. Diameter and width are what the "in inches" search is asking for.
MeasurementInchesMetric
Overall diameter30.4″773 mm
Section width10.4″265 mm
Sidewall height5.2″133 mm
Circumference95.6″2428 mm
Revolutions per mile663412 / km

The stamped width is 265 mm (10.4″). The aspect ratio is 50, so the sidewall is 50% of that width, which is 5.2″. The rim is 20 inches. Overall diameter is the rim plus two sidewalls: 20 + 2 × 5.2″ = 30.4″.

Sizes near 265/50R20

A swap that stays inside about 3% diameter usually keeps the speedometer honest and clears the same well. 275/50R20 is a close neighbour at +1.3% diameter. The percent column opens both stamps in the comparison calculator.

Catalog sizes closest to 265/50R20 by overall diameter.
SizeDiameterWidthvs 265/50R20
275/50R2030.8″10.8″+1.3%
245/75R1630.5″9.6″+0.1%
245/70R1730.5″9.6″+0.2%
265/65R1730.6″10.4″+0.4%
255/65R1730.1″10.0″-1.3%
31x10.50R1531.0″10.5″+1.9%

How to read the stamped size

265/50R20 is a metric size: width in millimetres, aspect ratio as a percent of that width, then the rim diameter in inches after the R. The how to read tire size page walks the whole sidewall, including load index and speed rating, which this page does not use.

These numbers are geometry, not a fitment guarantee

Diameter and width tell you whether a size is in the same family as what you have. They do not tell you whether 265/50R20 clears your fenders, matches your wheel width, or is load-rated for the vehicle. Check the door-jamb sticker and the wheel well before you buy.

Speedometer and revs

At 663 revolutions per mile, a trip computer calibrated for 265/50R20 is reading true only while this diameter is on the truck. A taller replacement under-reads speed and distance by the same percent the diameter grew. A shorter one over-reads. The comparison calculator puts a second size next to 265/50R20 and shows the error at 60 mph.

Frequently asked questions

What is 265/50R20 in inches?

265/50R20 is 30.4″ overall diameter and 10.4″ section width. The sidewall is 5.2″. Those convert the stamped size; they are not a brand measurement.

How tall is a 265/50R20 tire?

Overall diameter is 30.4″. That is the height of the tire standing on the ground, rim plus both sidewalls.

How wide is 265/50R20?

Section width is 10.4″ (265 mm). The tread is usually a bit narrower than the section width.