295/65R20 in inches

35.1″ overall diameter, 11.6″ section width, 7.5″ sidewall.

Current size

A full stamp like 275/65R20 or 33x12.50R15, or the three numbers below.

295/65R20
Diameter 35.1″
Width 11.6″
Sidewall 7.5″
Circumference 110.3″
Revs / mile 575

295/65R20 measures 35.1″ overall diameter and 11.6″ section width. Sidewall height is 7.5″, circumference is 110.3″, and the tire turns 575 times per mile. Those figures are geometry off the stamped size, not a brand or load range.

295/65R20 dimensions

Calculated from 295/65R20. Diameter and width are what the "in inches" search is asking for.
MeasurementInchesMetric
Overall diameter35.1″891 mm
Section width11.6″295 mm
Sidewall height7.5″192 mm
Circumference110.3″2801 mm
Revolutions per mile575357 / km

The stamped width is 295 mm (11.6″). The aspect ratio is 65, so the sidewall is 65% of that width, which is 7.5″. The rim is 20 inches. Overall diameter is the rim plus two sidewalls: 20 + 2 × 7.5″ = 35.1″.

Sizes near 295/65R20

A swap that stays inside about 3% diameter usually keeps the speedometer honest and clears the same well. 35x12.50R20 is a close neighbour at -0.3% diameter. The percent column opens both stamps in the comparison calculator.

Catalog sizes closest to 295/65R20 by overall diameter.
SizeDiameterWidthvs 295/65R20
35x12.50R2035.0″12.5″-0.3%
285/65R2034.6″11.2″-1.5%
325/75R1635.2″12.8″+0.3%
35x12.50R1735.0″12.5″-0.3%
35x12.50R1835.0″12.5″-0.3%
285/75R1834.8″11.2″-0.8%

How to read the stamped size

295/65R20 is a metric size: width in millimetres, aspect ratio as a percent of that width, then the rim diameter in inches after the R. The how to read tire size page walks the whole sidewall, including load index and speed rating, which this page does not use.

These numbers are geometry, not a fitment guarantee

Diameter and width tell you whether a size is in the same family as what you have. They do not tell you whether 295/65R20 clears your fenders, matches your wheel width, or is load-rated for the vehicle. Check the door-jamb sticker and the wheel well before you buy.

Speedometer and revs

At 575 revolutions per mile, a trip computer calibrated for 295/65R20 is reading true only while this diameter is on the truck. A taller replacement under-reads speed and distance by the same percent the diameter grew. A shorter one over-reads. The comparison calculator puts a second size next to 295/65R20 and shows the error at 60 mph.

Frequently asked questions

What is 295/65R20 in inches?

295/65R20 is 35.1″ overall diameter and 11.6″ section width. The sidewall is 7.5″. Those convert the stamped size; they are not a brand measurement.

How tall is a 295/65R20 tire?

Overall diameter is 35.1″. That is the height of the tire standing on the ground, rim plus both sidewalls.

How wide is 295/65R20?

Section width is 11.6″ (295 mm). The tread is usually a bit narrower than the section width.