35x12.50R20 in inches

35.0″ overall diameter, 12.5″ section width, 7.5″ sidewall.

Current size

A full stamp like 275/65R20 or 33x12.50R15, or the three numbers below.

35x12.50R20
Diameter 35.0″
Width 12.5″
Sidewall 7.5″
Circumference 110.0″
Revs / mile 576

35x12.50R20 measures 35.0″ overall diameter and 12.5″ section width. Sidewall height is 7.5″, circumference is 110.0″, and the tire turns 576 times per mile. Those figures are geometry off the stamped size, not a brand or load range.

35x12.50R20 dimensions

Calculated from 35x12.50R20. Diameter and width are what the "in inches" search is asking for.
MeasurementInchesMetric
Overall diameter35.0″889 mm
Section width12.5″318 mm
Sidewall height7.5″191 mm
Circumference110.0″2793 mm
Revolutions per mile576358 / km

This is a flotation size. The first number is the overall diameter (35.0″), the second is the section width (12.5″), and the last is the rim (20 inches). Sidewall height is half of (diameter minus rim): 7.5″.

Sizes near 35x12.50R20

A swap that stays inside about 3% diameter usually keeps the speedometer honest and clears the same well. 295/65R20 is a close neighbour at +0.3% diameter. The percent column opens both stamps in the comparison calculator.

Catalog sizes closest to 35x12.50R20 by overall diameter.
SizeDiameterWidthvs 35x12.50R20
295/65R2035.1″11.6″+0.3%
285/65R2034.6″11.2″-1.2%
35x12.50R1735.0″12.5″0.0%
35x12.50R1835.0″12.5″0.0%
285/75R1834.8″11.2″-0.5%
325/75R1635.2″12.8″+0.6%

How to read the stamped size

35x12.50R20 is a flotation size, common on trucks and off-road tires. The first number is already the overall diameter in inches, so there is no aspect-ratio step. See how to read tire size for the metric form and 33 vs 35 tires for the usual flotation pair.

These numbers are geometry, not a fitment guarantee

Diameter and width tell you whether a size is in the same family as what you have. They do not tell you whether 35x12.50R20 clears your fenders, matches your wheel width, or is load-rated for the vehicle. Check the door-jamb sticker and the wheel well before you buy.

Speedometer and revs

At 576 revolutions per mile, a trip computer calibrated for 35x12.50R20 is reading true only while this diameter is on the truck. A taller replacement under-reads speed and distance by the same percent the diameter grew. A shorter one over-reads. The comparison calculator puts a second size next to 35x12.50R20 and shows the error at 60 mph.

Frequently asked questions

What is 35x12.50R20 in inches?

35x12.50R20 is 35.0″ overall diameter and 12.5″ section width. The sidewall is 7.5″. Those convert the stamped size; they are not a brand measurement.

How tall is a 35x12.50R20 tire?

Overall diameter is 35.0″. That is the height of the tire standing on the ground, rim plus both sidewalls.

How wide is 35x12.50R20?

Section width is 12.5″ (318 mm). The tread is usually a bit narrower than the section width.